Drone Components

Product Image (DTL/05/DC20)

Cube Orange With ADS-B in

Price: 30200 INR/Piece

32 bit ARM STM 32H753 Cortex-M7 (with DP-FPU) 400 Mhz/1MB RAM/2 MB Flash 32 bit STM32F103 failsafe co-processor All sensors connected via SPI Regular power supply with automatic failover Servo rail high-power (7V) and high current ready Safety switch/LED Optional carrier board for Intel Edison It is one of the most powerful and latest model in the Cube pilot ecosystem. Can be used by commercial system modules, hobby users, and UAS manufacturers. Compatible with all the carriers that helps the users to select an off the shelf carrier board suitable according to their needs. The ADS-BI In module is an updated version from uAvionics, of the original carrier board. The updated version is identical to the standard versions just with following changes Integration of uAvonix ADS-B IN Receiver on Serial 5 Built-in ADS-B Antenna Removal of Intel Edison Bay and Debug USB Ports For the manufacturers, they can design their own carrier boards to suit their specific needs now and in the future.

Product Image (DTL/05/DC03)

Brushless Motor (4006 Antigravity 380KV) 2pcs /Set

Price: 13629 INR/Piece

T-Motor Antigravity 4006 380 KV Brushless Motor Unique ventilation and cooling system Ultrathin design, lightest weight Made of very high quality materials, Brushless motors are one of the first choices for FPV drones. It is because they can be fitted in all types and sizes of drones. For beginners it is mandatory to understand that there are 2 types of drones, one is brushed and the other is brushless. Both of them vary. Brushless last way longer and are more powerful, and can be used seamlessly for bigger quads. Even though the internal workings of both brushed and brushless are the same- based on electromagnetism, the difference lies in the efficiency. The total power used by the brushless is turned into rotational force, losing in less power as heat. Also, they last longer since there are no brushes to wear out, and makes it cheaper too. Increased efficiency- increased torque per watt of power input Higher torque to weight ratio Lower maintenance Increased reliability Reduced mechanical and operational noise With no brush and commutator erosion, it yields in longer lifespan

Product Image (DTL/05/DC23)

K 3-A Pro

Price: 35600 INR/Piece

Supports various types of rotors like Quadrotor (X type and + type) Supports Hexacopter with +type x type and coaxial types Supports various types of Octacopter. The type of ESC is below 490Hz PWM ESC Working voltage 2S to 12 S. Can support various types of flight modes Beneficial in using agriculture. The K3-A Pro can monitor the amount of liquid spray, and also its flow. Considered as one of the best flight controllers that has been in the market for some years, and is known for its reliability and stability. The software that is embedded in it is one of the excellently designed ones which makes this flight controller easy to operate. Since they are specially designed for agriculture drones, they are designed intelligently with high-level accuracy and precision and come with various flight modes.

Product Image (DTL/05/DC04)

Brushless Motor (MN 6007 Antigravity 160KV)

Price: 11956 INR/Piece

T-Motor Antigravity MN6007 160 KV Brushless Motor Unique ventilation and cooling system Ultrathin design, lightest weight Made of very high quality materials, Brushless motors are one of the first choices for FPV drones. It is because they can be fitted in all types and sizes of drones. For beginners it is mandatory to understand that there are 2 types of drones, one is brushed and the other is brushless. Both of them vary. Brushless last way longer and are more powerful, and can be used seamlessly for bigger quads. Even though the internal workings of both brushed and brushless are the same- based on electromagnetism, the difference lies in the efficiency. The total power used by the brushless is turned into rotational force, losing in less power as heat. Also, they last longer since there are no brushes to wear out, and makes it cheaper too. Increased efficiency- increased torque per watt of power input Higher torque to weight ratio Lower maintenance Increased reliability Reduced mechanical and operational noise With no brush and commutator erosion, it yields a longer lifespan

Product Image (DTL/05/DC06)

F 60 Pro IV 1750KV

Price: 2400 INR/Piece

Brand Name: T-Motor Model: F60 Pro IV Item Name: 2207 1750KV 1950KV 4-6S/2250 KV 4S Brushless Motor KV: 1750KV/1950 KV/2250 KV (optional) Colour: Gray/Red/Blue (optional) Version: CW Screw Thread Quantity: One PC Shaft Diameter: 5 mm Shaft Height: 12 mm Configuration: 12N14P Input Voltage: 4-6S@1750KV & 1950KV; 4S@2250KV Idle Current (10V): 1.2A@ &1950 KV; 2A@2550KV Burst Current (60S): 39A@1750 KV; 50m@1950KV; 46A@2550KV Internal Resistance: 65m@1750KV; 51m@1950KV; 37m@2550KV Max Power (60s): 940W@1750KV; 1190W@1950KV;746W@2550KV Dimension: 27.1x31.1 mm Weight: 32.5g@1750KV;32.3g@1950 KV; 32.4g@2550KV Built for high-speed racing Crafted product that reduces weight at every detail Inner motor pinhole (0.05g less) Customized silicone wire (0.4g less) 12 MM steel Shaft Silicon steel sheet (redesign to less 0.5g) Other (0.2g) Interlaced rib design The height of the shaft is reduced to 12MM With a special base design Improving your experiencing at every detail Effectively protecting the shaft thread with customized prop nut The optimized mounted holes matches perfectly with the frames/arms Package included: 1xT-Motor F60 Pro IV 2207 Motor

Product Image (DTL/05/DC21)

Cube Black

Price: 25400 INR/Piece

Power module input (4.8V to 5.4V) Servo rail input (4.8 V to 5.4 V) upto 10V manually override. USB power input (4.8V to 5.4V) Ideal diode controller with automatic failover Servo rail high-power (max.10V) and high current (10A+) ready Ideal diode controller with automatic failover All peripheral outputs over-current protected, all inputs ESD protected External safety switch Multicolor LED main visual indicator High-power, multi-tone piezo audio indicator Abundant connectivity options for additional peripherals Integrated backup system for in-flight recovery and manual override Multicolour LED main switch High-power, multi-tone piezo audio indicator microSD card for high-rate logging over extended periods of time

Product Image (DTL/05/DC15)

Cube Orange

Price: 22400 INR/Piece

Having ample connectivity options for any additional peripherals Integrated back up system for any in-flight recovery as well as manual override that comes with stand alone power supply and dedicated processor. The back up system merges mixing that provides consistent autopilot and manual override with dedicated processor and stand alone power supply External safety switch Multicolour LED mains visual indicator High power, multi-tone piezo audio indicator microSD card for high-rate logging over extended period of time The Cube Orange is a flight controller and is a flexible autopilot that is primarily intended for manufacturers of commercial systems. It has been designed to be used as a domain-specific carrier board. This is used to reduce the wiring, increase the reliability, as well as ease of assembly.

Product Image (DTL/05/DC22)

ADS-B Carrier Board

Price: 15811 INR/Piece

Built-in ADS-B Antenna New product Livery Integration of uAvionix ADS-B IN Receiver Correct labeling of CAN Ports

Product Image (DTL/05/DC18)

Here3 GPS

Price: 21000 INR/Piece

A cost-efficient GNSS system that supports RTK mode In an ideal environment the positioning accuracy is down to centimeter-level Noise immunity, high data rate, upgradeability as well as real features

Product Image (DTL/05/DC10)

Propeller 30inch

Price: 3421 INR/Piece

Usage Application: Drone Brand: HOBBYWING Size: 30x90 inch Colour: Black: Blades: 2 Minimum Order Quantity: 1 set To be used as clock-wise Does not comes as aluminum hub, only a propeller Foldable for agriculture drones Easy to use, installed and can be replaced An ideal replacement Lowers noise and its quick release feature makes the drone perform their function accurately Comes with high strength and low price, thus making the performance ratio very high Can be used for any kind of Agriculture drone- for it is easy to maintain, and can be replaced easily.

Product Image (DTL/05/DC19)

Data Modem RFD 900

Price: 29500 INR/Piece

RF:2 x RP-SMA connectors Serial: Logic Level RS232 (+3.3v nominal, +5v tolerant) Power: +5v, ~800mA max peak (at maximum transmit power) GPIO: 6 General purpose IO (Digital, ADC, PWM capable) Long range> 40km but depending on the GCS setup and antennas 1 watt (+30dBm) transmit power 2xRP-SMA RF connectors, diversity switched Small, light weight Passive front end bass pass filter Compatible with 3DR/Hope-RF radio modules >20dB Low noise amplifier RXSAW filter Open source firmware/tools, field upgradeable, easy to configure The radios have 2 status LEDs, one Red and one Green

Product Image (DTL/05/DC17)

Purple Cube

Price: 12300 INR/Piece

Processor 32-bit ARM Cortex M4 core with FPU 168 Mhz/256 KB RAM/2 MB Flash 32-bit failsafe co-processor Sensors 1xIMU (accels, gyros and compass) 1x InvenSense MPU9250 (accel and gyro) 1xMS5611 barometers The main purpose of the Purple Cube autopilot is that it is used in cars, boats or rovers. Comes with following features Single IMU sensor Single Baro Sensor The entire FMU (flight management unit) and IMU (inertial management unit) are put together in a relatively small form factor that is the cube. One can even design their own carrier boards according to their needs. Due to its small size and having almost the same capability with the standard carrier board. It is known to fit to all those application that has small size limits Easy switching from one power to another when one fails Dual power input for redundant power If one device draws too much current, then it aims to avoid the overloading of the power Limiting the current at each connector

Product Image (DTL/05/DC07)

P14X4.8 Prop - 2 pcs /Pair

Price: 5400 INR/Piece

Diameter/Pitch: 14 *4.8 (355.6mm*121.9mm) Weight (single propeller: 151.5g Material: CF+Epoxy Surface Treatment: Polished Propeller type: 2 blades-integrated Working Temp: -40C~ 65C Storage humidity- <85% Optimum RPM- 4500-7500 RPM/min Thrust limitation- 5kg The screws of cover plates and propellers are mounted properly The propellers needs to be in perfect condition, and has to be checked The Propellers needs to be kept away from any kind of hostile environment and must be in compliance with storage temperature and humidity requirements. Has long flight time Has higher loaded ability 100% balance High strength/lightweight

Product Image (DTL/05/DC08)

Propeller (MF3218)

Price: 8811 INR/Piece

Weight: 0.0204 kg Dimensions: 405 x 158x 67 cm Abrasion Resistance of Prop surface: x1.5 Material Density: -3.5% Prop Strength-x2 The propollers are of durable density, light weight, and small amount of inertia You can easily choose the most suitable propellers for it comes with clear naming convention The hybrid technology of carbon fiber and polymers, the continuous reform and improvement in injection modeling makes it a higher standard for X-carbon Props. Each prop challenges the limit of injection technology as well as mold for 0.25 mm trailing edge. This leads to reduction of airflow interference, and increase in lift-drag ratio. To protect the props from ultraviolet heat insulating coating of high shading degree is employed to the surface. It is this heat endurance of the prop material that enables long time flight even at extreme temperature It is with the help of T-Motor that the ideal aerodynamic interaction is achieved for propeller performance of the forecast program. More than 10 candidates were compared to yield the final propeller design, on the targeted working condition. To make it flawless, CAE finite element analysis is done, that is fluid-solid coupling technology is being employed. To analyze the structure, more load is distributed into the fluid simulation onto the propeller. This is done for tangible monitoring over the condition of each part of the propeller to make it flawless. To protect the propellers from extreme impact, the T-MOTOR Energy- snubber technology is adopted that is added to stop unique structural deformation, which will help to absorb the energy from impact. The PTFE spacer is customized in such a way to ensure longer service life. The prop connector made of aluminum alloy of 7075 makes it light, tough and ruthless To offer you superb experience from control of fast response, it comes with an ideal combo of T-Motor Alpha ESCs and Motors.

Product Image (DTL/05/DC11)

Air 40A

Price: 4100 INR/Piece

Model: AIR40A Concurrent: 40A Peak Current (10S): 60A BEC: No Lipo: 2-6S Programmable Item: Timing (intermediate/High) Weight: 26g Size (L*W*H): 55.6*25.2*11.3mm Improved throttle responses with special core program for multi-rotor controllers The specially optimized firmware makes it compatible with disc-type motors in an excellent way You can easily present all the settings, except the timing. This makes the usage adaptive, simple and highly intelligent To make the flight more stable, the throttle is designed in a twisted-pair that efficiently reduces the crosstalk produced in single transmission Can support a signal frequency of upto 621 Hz. Is compatible with all types of flight-control systems Known to provide better performance Highly adaptive and intelligent Comes with special core program

Product Image (DTL/05/DC16)

Kore Carrier Board

Price: 25675 INR/Piece

The KORE Carrier Board is for the CUBE and its primary purpose is to reduce the innumerable nest of wires and modules that you can find with a multi-rotor assembly. This carrier board has been optimized geometrically for quadcopters, octocopters and X8 configurations. Thus providing all the connections for every function of the CUBE autopilot. Power and signal for ECS that is conveniently placed in the corners Built-in power distribution Continuous power supplies for critical components in flight It gives in good power and also shows error in the indicator lights There is a built-in buzzer that comes with volume control For every function there are connectors of the CUBE Easily accessible PWM voltage level sector (3.3V or 5V) Resistant to ground bounce on PWM signal Compatible with connector with standard ProfiCNC carrier load Connector ports for debugging IO and FMU processors

Product Image (DTL/05/DC09)

Propeller (MS1503)

Price: 1900 INR/Piece

Model No. M51503 Diameter: 15 inch [measured diameter: 382mm] Length: 15 Pitch: 5.6 (142.24 mm) Recommended Thrust/RPM: 1-1.5kg/4100-5000 RPM Weight: 25g Material: Polymer: + CF Ambient Temp: 40C65C T-Motor Series: 2 blades-integrated Package Weight- 135g Package size: 419*52*43mm Material: Polymer +CF Recommended Max Thrust/RPM: 4.5kg/8400 RPM Storage Temp/Humidity: -10C50C/ <85% Efficient flight, tailored airfoil Stringent control over dynamic balance Stable operation, small deformation Has an high-efficiency airfoil that fit the multirotors It comes with the thinnest that is almost 0.25mm and is designed in arch shaped that is used to raise the lift-drag ratio Durable enough for any kind of steady operation for a long duration. The specially formulated materials that come with heat insulated coating on the surface, makes it so. With 3000 RPM‰6 mg there is a dynamic balance and while in operation it vibrates less. On the cover plate you will find stimulation and operation that not only ensures strength but comes with exquisite structure design. High class performance even under high temperature and humidity

Product Image (DTL/05/DC14)

Mini CB

Price: 6400 INR/Piece

Power Input voltage/rated input current: 4-5.7V/2.5A; 0-20V is safe for the system but it will not work Power rated output/input power: 14w USB port input voltage/ rated input current: 4-5.7V/250mA Servo rail input voltage: 4-10.5V Waterproof: External waterproofing required Working temperature: -10C/55C Mini Carrier Board Size/Chassis Material: 47.5x38.5x17.8 (mm)/ABS Molding

Product Image (006)

Drone Components

Price: 5000 INR/Piece

At Drones Tech Lab, we provide an extensive selection of drone components and parts at competitive prices. Upgrade and enhance your drone's performance with the best components. Each component is backed by a warranty and features advanced technology to optimize your drone's capabilities. Enjoy the convenience of doorstep delivery, as we offer delivery services throughout Pan India.

X


Back to top
trade india member
RCHOBBYTECH SOLUTIONS PRIVATE LIMITED All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Private Limited.